Detailed Product Description

1). Model:12 mosfets controller

2). Size:130x85x50mm Weight:0.6kg each bridge two mosfets in parallel connection *

3). Rated voltage: DC 48V/60V *

4). Rated Power: 48V500W,60V600W *

5). Low Voltage Protection: *

6). Current Limit: 15~23A(±0.5A) *

7). Standby Power Consumption: < 3W *

8). Cruise Mode: Automatic Cruise or Manual Cruise. Stabilizing throttle for consecutive 8 seconds enters automatic cruise mode which makes e-bikes run at a const speed once releasing control from throttle *

9).  Indicators: Work with multiple serial or parallel indicators, positive or negative shared indication LEDs( low voltage, current limit or cruise ) *

10). Speed Indicators: Hall sensor speed indicators, positive or negative phase line speed indicators *

11). 1:1 pedal assistance: controller provides power assistance based on pedal feedback(speed) during pedaling. Various central hall sensors are provided like central shaft speed sensors or Torque sensors. *

12). Braking: work with open circuits low voltage brake, high voltage brake( +5V, +12V) *

13). EABS braking: soft EABS braking system without braking noise and damage on motor. It makes motor sharply stop with a soft effect similar to that of EABS on vehicles. This regenerative braking brings energy back to battery from motor motion. *

14). Running regeneration: after throttle being released, the running motor transfer energy from motion into electrical power being stored into battery. This is power saving but will shorten distance of running. This function is selectable. *

15). Super low noise: super low noise at motor start and run beyond the performance of traditional brushless controller, making a low vibration and enlarge length of use *

16). Low heat generation: use the most advanced complementary PWM technique to lower the system heat generation. It optimizes power usage and extend length of use *

17). Multiple current limits: Use average current limit and peak current limit. Peak current limit checks current peak at every PWM cycle and protect MOSFET from resistless peak current and avoid damage. Average current limit makes controller a const current limit performance on all motors at low load, medium load, high load or stall. This simplifies testing process and checking process for e-bike manufacturers. *

18). Runaway protection: solve the problem of motor runaway from the problem of throttle or circuits and improves reliability. *

19). Stall protection: controller protects motor stall from stopping motor at 3 seconds in stall * 20). Short Circuits protection: controller protected once two or all of three phase lines are connected.